Operation manual / Spare parts list
Single disc machines
6
2
2.1
Safety
General information
Adherence to the safety notes helps to protect against injuries and reduces the risk of an improper
utilisation of the machine. Every user of this machine and personnel charged with the assembly,
maintenance or repair of this machine must have read and understood the contents of the instructions
prior to starting any work.
2.2
Dangerousness of the machine
Attention, danger of injury at running machine
When the machine is started, acceleration takes place (generating a strong jerk). This jerk can
be the cause that the operator looses control of the machine in case of improper use.
Hold the machine firmly with both hands at the handle.
2.3
Safety instructions (operation)
Warning! Danger of life!
When crossing and damaging the electrical cable: DANGER due to electric shock!
Perform a safety check prior to each start of the machine:
•
Inspect the connecting cables and connectors/pugs for damage and improper connected load.
•
Route the electrical cables properly to prevent persons tripping over them.
•
Do not switch on the machine until it is in working position.
•
Hold the machine firmly with both hands at the handle.
•
Switch of the machine immediately when the operation is completed.
2.4
Designated use
The Roll-single disc machine has been designed and built exclusively for sanding, polishing and
cleaning of floors.
By no means may the machine be used for the treatment of other surfaces.
Using the machine outdoors is not allowed.
If the machine is used for purposes other than those intended, the manufacturer of the machine
can not be held liable for any damage to persons, property or pets resulting from such misuse.
