User Manual of Network Camera
86
Basic Settings
Steps:
1.
Enter the Snapshot Settings interface:
Configuration > Advanced Configuration > Storage > Snapshot
2.
Check the
Enable Timing Snapshot
checkbox to enable continuous snapshot.
You can click
Edit
to set the time schedule for continuous snapshot.
3.
Check the
Enable Event-triggered Snapshot
checkbox to check event-triggered
snapshot.
You can set the capture number for the event triggered snapshot.
4.
Select the quality of the snapshot.
5.
Set the time interval between two snapshots.
6.
Click
Save
to save the settings.
Uploading to FTP
You can follow below configuration instructions to upload the snapshots to FTP.
Upload continuous snapshots to FTP
Steps:
1)
Configure the FTP settings and check
Upload Picture
checkbox in FTP Settings
interface. Please refer to
Section 6.3.11
Configuring FTP Settings
for more
details to configure FTP parameters.
2)
Check the
Enable Timing Snapshot
checkbox.
Upload event-triggered snapshots to FTP
Steps:
1)
Configure the FTP settings and check
Upload Picture
checkbox in FTP Settings
interface. Please refer to
Section 6.3.8
Configuring FTP Settings
for more details
to configure FTP parameters.
2)
Check the checkbox of
Upload Picture
to set it as the alarm linkage method.
Summary of Contents for RBOF2-1W
Page 1: ...9 Network Camera User Manual...
Page 88: ...User Manual of Network Camera 87 Figure 7 8 Snapshot Settings...
Page 106: ......