User Manual of Network Camera
67
Note:
To send the Email when an event occurs, you need to refer to
Section
5.3.9
to set the related parameters.
Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP
server.
Note:
Set the FTP address and the remote FTP server first. Refer to
Section
5.3.11
for detailed information.
Trigger Channel
The video will be recorded when the motion is detected. You have to set the
recording schedule to realize this function. Please refer to
Section 6.2
for
detailed information.
Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note:
To trigger an alarm output when an event occurs, please refer to
Section
5.6.4
to set the related parameters.
Expert Configuration
Expert mode is mainly used to configure the sensitivity and proportion of object on
area of each area for different day/night switch.
Figure 6-37
Expert Mode of Motion Detection
Day/Night Switch OFF
Steps:
(1)
Draw the detection area as in the normal configuration mode. Up to 8 areas are
supported.
Summary of Contents for RBOF2-1W
Page 1: ...9 Network Camera User Manual...
Page 88: ...User Manual of Network Camera 87 Figure 7 8 Snapshot Settings...
Page 106: ......