Roline RBOF2-1W, User Manual, Page: 76 / 106

User Manual of Network Camera
75
6.6.8 Traversing Virtual Plane
This function can be used for detecting people, vehicles and objects traversing a
pre-defined virtual plane. The traversing direction can be set as bidirectional, from left
to right or from right to left. And a series of linkage method will be triggered if any
object is detected.
Steps:
1. Check the Enable Traversing Virtual Plane Detection checkbox.
2. Check the Enable Dual-VCA checkbox. The event information will be recorded
in the video stream, and you can search it out via smart search function during
playback on the Hybrid DVR / NVR.
3. Click the Draw Area , and a virtual plane will show on the image.
4. Click on the line, and you will see two red squares on each end, drag one of the
red squares to define the arming area.
Figure 6-46 Traversing Virtual Plane Settings
And you can select the directions as A<->B, A ->B, and B->A.