User Manual of Network Camera
85
Record Triggered by Motion | Alarm
If you select
Motion | Alarm
, the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the
Motion Detection
and
Alarm Input Settings
interfaces.
Please refer to
Section 5.6.1
and
Section 5.6.3
for detailed information
.
Figure 7-7
Edit Record Schedule
(3)
Check the checkbox of
Select All
and click
Copy
to copy settings of this day
to the whole week. You can also check any of the checkboxes before the date
and click
Copy
.
(4)
Click
OK
to save the settings and exit the
Edit Record Schedule
interface.
6.
Click
Save
to save the settings.
7.3
Configuring Snapshot Settings
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The captured
picture can be stored in the SD card (if supported) or the netHDD (For detailed
information about netHDD, please refer to
Section 7.1
Configuring NAS Settings
).
You can also upload the captured pictures to a FTP server.
Summary of Contents for RBOF2-1W
Page 1: ...9 Network Camera User Manual...
Page 88: ...User Manual of Network Camera 87 Figure 7 8 Snapshot Settings...
Page 106: ......