Roland XS-80H Remote, Owner'S Manual

Page: 3 / 10

Setting Up XS-80H Remote
3
Directly Connecting the iPad and XS-80H
Series Device (Ad-hoc Mode)
This makes a direct wireless connection between the iPad and the
XS-80H series device without using a Wi-Fi router (ad-hoc mode).
NOTE
The iPad connected in ad-hoc mode cannot connect to the
Internet or communicate with other Wi-Fi devices.
1.
Insert the optional wireless USB adaptor into the USB
WLAN ADAPTOR port on the XS-80H series unit.
For the wireless USB adaptor, use the ONKYO UWF-1 or Roland
WNA1100-RL.
2.
On the XS-80H series device, make the setting for ad-hoc
mode.
1
Use the [MENU] button to select “WIRELESS LAN,” then set
“AD-HOC MODE” to “ON.”
This turns on ad-hoc mode.
2
From the WIRELESS LAN menu, select “INFORMATION,” then
press the [VALUE] dial.
The “WLAN INFORMATION” popup appears.
The following information is required when making the
connection to the iPad.
Indication Description
SSID This displays the SSID.
AD-HOC KEY This displays the ad-hoc key.
MEMO
When connecting multiple XS-80H series devices of the same
model, to distinguish between SSIDs, set the wireless ID on each
XS-80H series unit. For details, refer to “Setting the Wireless ID”
(p. 5).
3.
On the iPad, make the network settings.
1
On the iPad, tap “Settings” g “Wi-Fi” and make sure “Wi-Fi” is
turned on, then for “Device,” select the SSID displayed in the
“WLAN INFORMATION” popup on the XS-80H series unit.
2
If a screen for entering a password appears, enter the ad-hoc
key displayed in the “WLAN INFORMATION” popup on the
XS-80H series device.
MEMO
5
If the connection cannot be made smoothly, changing the
channel of the ad-hoc mode on the XS-80H series device might
help.
Use the [MENU] button to select “WIRELESS LAN”
g
“AD-HOC
CH,” and change the ad-hoc mode channel (1 through 11).
5
When you’re not making a connection in ad-hoc mode, return
the iPad’s “Settings” g “Wi-Fi” settings to their original values.
4.
Press the [MENU] button on the XS-80H series device to
exit the menu.
Connecting to a Wi-Fi Router by WPS
This connects the XS-80H series device and Wi-Fi router by using
WPS.
“
WPS
” is a feature that makes it easy to connect to a Wi-Fi router
and make security-related settings.
MEMO
5
The Wi-Fi router you’re using must support WPS.
5
When a WPS connection is made to a Wi-Fi router, the
connection information is saved in memory, and thereafter the
connection is established automatically.
1.
Insert the optional wireless USB adaptor into the USB
WLAN ADAPTOR port on the XS-80H series unit.
For the wireless USB adaptor, use the ONKYO UWF-1 or Roland
WNA1100-RL.
2.
Connect the XS-80H series device to the Wi-Fi router.
1
Wait until the icon shown below appears at the upper right of
the XS-80H series device’s display.
2
Use the [MENU] button to select “WIRELESS LAN” g “WPS,”
then press the [VALUE] dial.
The “WPS” popup appears.
3
Enable WPS on the Wi-Fi router (e.g., press the router’s WPS
button).
* To enable WPS on the Wi-Fi router, refer to the documentation
for the router.
4
Press the [VALUE] dial.
The WPS connection is established.
When connection is successful, the “WPS” popup disappears and
the unit returns to the WIRELESS LAN menu.
5
Press the [MENU] button to quit the menu.
3.
Connect the iPad and the Wi-Fi router.
1
On the iPad, tap “Settings” g “Wi-Fi,” make sure Wi-Fi is turned
on, then at “Choose a Network,” select the Wi-Fi router to
which the XS-80H series device is connected.