Roland XS-80H Remote, Owner'S Manual, Page: 5 / 10

Setting Up XS-80H Remote
5
Setting the Wireless ID
Here you set the device name and SSID for the Wi-Fi-connected
XS-80H series unit displayed in XS-80H Remote.
When multiple XS-80H series devices of the same model are on the
network, you can change the device names and SSIDs by setting
wireless IDs within a range of 1 to 99.
The XS-84H is used in the following example.
Wireless ID = 0: “XS-84H” (default)
Wireless ID = 1: “XS-84H-1”
:
Wireless ID = 99: “XS-84H-99”
* The wireless ID is a setting shared by the wired LAN and the
wireless LAN.
1.
Use the [MENU] button on the XS-80H series device to
select “WIRELESS LAN,” then use “WIRELESS ID” to set the
wireless ID.
The device name and SSID change automatically when you make
the “WIRELESS ID” setting.
2.
Press the [MENU] button to quit the menu.
Checking the Wi-Fi Information
Here you check the Wi-Fi information for the XS-80H series device.
1.
Use the [MENU] button on the XS-80H series device to
select “WIRELESS LAN”
g
“INFORMATION,” then press the
[VALUE] dial
The “WLAN INFORMATION” popup appears.
You can check and verify the following information.
Indication Description
STATUS
This displays the connection status.
CONNECTED:
Connected to the Wi-Fi router.
NOT CONNECTED:
A wireless USB adaptor is attached, but no
connection to the Wi-Fi router is in effect.
NOT AVAILABLE:
No wireless USB adaptor is attached.
AD-HOC:
In ad-hoc mode.
SSID This displays the SSID.
IP ADDRESS This displays the IP address.
SUBNET MASK This displays the subnet mask.
MAC ADDRESS This displays the MAC address.
AD-HOC KEY This displays the ad-hoc key.
2.
Press the [MENU] button to quit the menu.
Making a Wired Connection to the
Wi-Fi Router
Here you connect the XS-80H series device to the Wi-Fi router using
a network cable and make a wireless connection to the iPad via the
router.
* For information on how to operate the Wi-Fi router, refer to the
router’s documentation.
XS-84H
1.
Use a network cable to connect the LAN port on the
XS-80H series unit to the Wi-Fi router.
2.
Connect the XS-80H series device to the Wi-Fi router.
1
Use the [MENU] button on the XS-80H series device to select
“LAN,” and then make the following settings.
Menu item Description
CONFIGURE This sets whether the IP address is obtained automatically
(USING DHCP) or set manually (MANUALLY).
IP ADDRESS
This sets the IP address when “CONFIGURE” is set to
“MANUALLY.”
* The subnet mask is fixed at “255.255.255.0” and cannot
be changed.
2
Press the [MENU] button to quit the menu.
3.
Connect the iPad and the Wi-Fi router.
1
On the iPad, tap “Settings”
g
“Wi-Fi,” make sure Wi-Fi is turned
on, then at “Choose a Network,” select the Wi-Fi router to
which the XS-80H series device is connected.