Roland XS-62S Owner'S Manual Download Page 36

Page: 36 / 48

Other Features

Preventing Unintended Operation (Panel Lock)

This locks operation of buttons and knobs to prevent unintended

operation of the XS-62S.

Select the [MENU] button

“SYSTEM”

“PANEL

LOCK.”

With the cursor positioned at “ENTER,” press the

[VALUE] knob.

The PANEL LOCK menu appears.

Select a target for panel lock, then use the [VALUE]

knob to specify whether panel lock is enabled (ON)

or disabled (OFF).

You can select the following menu items as targets for panel lock.

Menu item

Target of panel lock

MENU+EXIT

[MENU] and [EXIT] buttons

VALUE

[VALUE] knob

CROSS POINT

Cross-point [1]–[8] buttons

SW MODE

[SW MODE] button

FREEZE

[FREEZE] button

PinP

[PinP] button

DSK

[DSK] button

TAKE

[TAKE] button

AUTO MIXING SW

[AUTO MIXING] button

CH VOLUME

AUDIO MIXER [1]–[5/6] knobs

MASTER VOLUME

[MASTER] knob

Press the [VALUE] knob to apply the setting.

Repeat steps 3 and 4 as needed.

Press the [MENU] button to quit the menu.

Press and hold the [EXIT] button and the [MENU]

button at the same time (for 3 seconds or longer).

The message “PANEL LOCKED” is displayed, and panel lock is

turned on. The button and controls that you set to enabled (ON) in

step 3 are locked.

To turn off panel lock, again press and hold the

[EXIT] button and the [MENU] button at the same

time (for 3 seconds or longer).

The message “LOCK RELEASED” is displayed, and panel lock is

turned off.

Operating the XS-62S or an External

Device by Remote Control

You can remotely control the XS-62S from a computer, or remotely

control an externally connected camera.

Using the dedicated XS-62S RCS program

You can connect the XS-62S to a computer via a CONTROL (LAN)

connector, and use dedicated program XS-62S RCS to operate the

unit by remote control.
For more information about operation methods, refer to the

owner’s manual included with XS-62S RCS.

LAN

RS-232

XS-62S RCS

“XS-62S RCS” can be downloaded from the Roland website listed

at the bottom of the page.

Using RS-232 or the CONTROL (LAN) connector

You can operate the XS-62S remotely from an external device.

Using RS-422 connector

You can connect a VISCA-compatible video camera to the RS-422

connector and operate the camera remotely from the XS-62S.

Roland website

XS-62S RCS can be downloaded from the Roland website.
For details on the specifications of the RS-232 connector

and RS-422 connector, and for details on remote control,

refer to the “Reference Manual” (PDF) which you can

download from the Roland website.

https://proav.roland.com/

Summary of Contents for XS-62S

















































Search results

Summary of Contents for XS-62S

Reviews:

Related manuals for XS-62S

Brands by name

Popular brands

Roland XS-62S, Owner'S Manual

Search results

Summary of Contents for XS-62S

Reviews:

Related manuals for XS-62S

Brands by name

Popular brands