manualshive.com logo in svg

Roland XS-62S, Owner'S Manual

The Roland XS-62S is a versatile audio and video switcher designed for professional live events. With its compact size and intuitive interface, it offers seamless integration between various sources. For a hassle-free setup, make sure to download the free Quick Start Manual from our website manualshive.com to get started effortlessly.

Share
Download
background image

37

Other Features

Outputting a Tally Signal

You can output a tally signal from the TALLY/GPIO connector.

A tally signal is output from the connector pin corresponding to 

the video channel being output, also including video composition 

and transition effects.
*  The tally signal output affects the video of the PGM/1 and 

PVW/2 buses.

Roland website

For the specifications of the TALLY/GPIO connector, refer 

to the Reference Manual (PDF), available for download at 

the Roland website.

https://proav.roland.com/

Summary of Contents for XS-62S

















































Reviews:

No comments

Related manuals for XS-62S

D-Link DGS-3224TGR - Switch User Manual preview
DGS-3224TGR - Switch
Brand: D-Link Pages: 160
D-Link DGS-3024 User Manual preview
DGS-3024
Brand: D-Link Pages: 145
D-Link DGS-1510 Series Getting Started Manual preview
DGS-1510 Series
Brand: D-Link Pages: 64
D-Link DES-3528 - xStack Switch - Stackable Reference Manual preview
DES-3528 - xStack Switch - Stackable
Brand: D-Link Pages: 367
H3C S9500E Series Connecting Manual preview
S9500E Series
Brand: H3C Pages: 13
H3C S9500E Series Security Configuration Manual preview
S9500E Series
Brand: H3C Pages: 207
H3C S3100-52P Operation Manual preview
S3100-52P
Brand: H3C Pages: 62
AVE 8PSWT Specification preview
8PSWT
Brand: AVE Pages: 2
3onedata ES1026-2F Quick Installation Manual preview
ES1026-2F
Brand: 3onedata Pages: 2
FS S3200 Series Quick Start Manual preview
S3200 Series
Brand: FS Pages: 41
HIKVISION DS-PDEB-EG2-WE Manual preview
DS-PDEB-EG2-WE
Brand: HIKVISION Pages: 5
PhD Solutions MXC-P442-HDTL Operation Manual preview
MXC-P442-HDTL
Brand: PhD Solutions Pages: 23
Cabletron Systems 9F426-03 Appendix preview
9F426-03
Brand: Cabletron Systems Pages: 14
Cabletron Systems MicroMMAC-22E Installation Manual preview
MicroMMAC-22E
Brand: Cabletron Systems Pages: 83
G&D ControlCenter-IP-XS Installation Manual preview
ControlCenter-IP-XS
Brand: G&D Pages: 56
I-Tech CMS-6R4 User Manual preview
CMS-6R4
Brand: I-Tech Pages: 123
Bticino RW4003DCW Quick Start Manual preview
RW4003DCW
Brand: Bticino Pages: 2
Emos 3402114000 Manual preview
3402114000
Brand: Emos Pages: 44

Brands by name

Popular brands

Load more brands