3
Use the TIME/VALUE dial to select the type of effect (Patch).
Here, let’s select “A00 RV:LargeHall.”
4
After selecting the effect, press [YES].
5
Press [FADER (EDIT)] several times to let the FADER indicator
light green. (Track Mixer)
6
Press channel 1 [CH EDIT].
The upper left of the display will indicate “CH1,” allowing you to make settings
for Track 1.
7
Hold down [SHIFT] and press channel 7 [EFFECT-1 (CH EDIT)].
The upper line of the display
will indicate “EFFECT1=,”
allowing you to make effect1
settings.
8
Use the TIME/VALUE dial to turn the effect on and off. Here,
select “PstFade” (post-fader) to apply effect to the sound after the
output of the channel fader.
9
Now it is set up. Press [PLAY (DISPLAY)].
The initial display reappears.
10
Hold down [STOP] and press the Track 1 STATUS button.
The STATUS indicator lights green.
11
Press [PLAY] to begin playback of the song.
Check the effect is being applied.
For more detailed information, please refer to “Using the Internal
Effects” (Owner’s Manual p. 66).
If you want to use effects you already have, please refer to “Using
External Effects Devices” (Owner’s Manual p. 185).
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIME
48
24
4
0
dB
12
Basic Operation (Multi-Track Recording)
29
