Re-recording a Specific Section
Sometimes, when listening to a recorded performance, even if you don’t find it
necessary to discard the entire song, there may be sections containing mistakes
or lyrics that are hard to hear. In such instances, you will find the following pro-
cedure convenient for recording over only selected parts of a recording. This
function is called
Punch-in/Punch-out
.
1
Hold down [REC] and press the STATUS button for the track you
wish to rerecord.
The STATUS indicator blinks red.
2
Adjust the input sensitivity by following the steps as described in
3 of “Recording to the Tracks” (p. 15).
3
Press [PLAY] to begin playback of the song.
2
1
3
When Using Punch-In Recording
In Punch-In recording, the track containing the previous recording and the source you
are going to record must have the same volume. When you press the STATUS button
for the track you want to rerecord during playback, you can alternate monitoring of
the track and the source. Compare those sounds and adjust the input sensitivity with
the INPUT knob until no difference in volume remains between the two.
Basic Operation (Multi-Track Recording)
21
