3. Assembling and Installing
29
Move the Right media holder to the left side of the shafts.
Pass it through from the right edge (as seen from the back of the machine).
Hook the media holder (right) on the shaft in the back.
Attach the media holder retaining screw.
Only light tightening is necessary for the media holder retaining screw.
Attach the shaft clamps to the shaft.
The shaft is secured. Do not place the media holders too closely to the edge so that they will not get
caught in the shaft clamps.
Shaft clamp
Shaft clamp
Hexagonal wrench
Bolt
Summary of Contents for versaUV lec-540
