44
5. Installing the Ink Cartridges
Filling with Ink for the First Time
When installing ink cartridges for the first time, clean the print heads with the cleaning solution, and then fill
with ink of each color. This operation requires four SOL INK cleaning cartridges.
*For SOL INK cartridges and ink cartridges, be sure to use new ones.
*Never, under any circumstances, use anything other than the specified type of ink or cleaning fluid.
* You can switch the ink type after filling with ink although there are some restrictions. See “Switching the Ink
Type” in User’s Manual for more information.
Selecting the Ink Mode
When you use the printer for the first time, you need to select a proper combination (ink mode) according to the usage.
Ink mode
Ink cartridges
Ink cartridge type
Gloss mode
1 cartridge each of cyan, magenta, yellow, and black
2 cartridges of gloss
The
EUV/EUV3/EUV4 ink
White mode
1 cartridge each of cyan, magenta, yellow, and black
2 cartridges of white
Gloss/White mode
1 cartridge each of cyan, magenta, yellow, black, gloss, and white
EUVS ink mode
1 cartridge each of cyan, magenta, yellow, and black
2 cartridges of white
The EUVS ink
* Ink type: Indicates the type of ink that is used. Examples include EUV ink and EUV3 ink.
* Ink mode: Indicates the combination of the ink colors that are used. Examples include white mode and gloss
mode; the name of the special color used is included in the ink mode.
Procedure
Close the front cover 1.
If the main power switch is on, then switch it off.
w
<Gloss mode>
Hold down
and
, switch on the main power switch.
When the message shown below appears on the display screen, release the oper-
ation-panel buttons.
<White mode>
Hold down
and
, switch on the main power switch.
When the message shown below appears on the display screen, release the oper-
ation-panel buttons.
SET INK MODE
GLOSS INK
SET INK MODE
WHITE INK
Summary of Contents for versaUV lec-540
