Roland VE-7000, Owner'S Manual

Page: 9 / 34

9
Names of Things and What They Do
Rear panel
fig.rear
1
MIDI connectors (MIDI IN/OUT)
These connectors are used to connect MIDI devices.
MIDI OUT is normally connected to the MIDI IN connector of the device
being controlled by the VE-7000, such as the VM Console.
MIDI messages received at MIDI IN will be output (“thru'ed”) without
change from MIDI OUT. Use this when you wish to send MIDI messages
such as MTC (MIDI Time Code) from an external MIDI device to the VM
Console.
2
POWER
This turns the power of the VE-7000 on/off.
3
AC Adapter Jack (DC IN)
Connect the included “PSB-1U” AC adapter to this jack. Never use any other
AC adapter.
4
Cable Hook
Hook the cable of the “PSB-1U” AC adapter around this hook to prevent
accidental disconnection.
fig.CordHook.e
1
2
3
4
To prevent malfunction
and/or damage to speakers
or other devices, always
turn down the volume, and
turn off the power on all
devices before making any
connections.
To prevent the inadvertent
disruption of power to
your unit (should the plug
be pulled out accidentally),
and to avoid applying
undue stress to the AC
adaptor jack, anchor the
power cord using the cord
hook, as shown in the
illustration.
Cord Hook
The cord of
the supplied AC Adaptor
To the Power Outlet