Roland VE-7000, Owner'S Manual

Page: 11 / 34

11
Before you begin
Save your data
1
Insert the data memory card (2--16 MB) that you normally use.
2
Turn on the power of the console.
3
Hold down [SHIFT] and press [STORE (UNDO/REDO)].
4
Press [F4 (OK]. The project will be stored.
Perform the update - Update A
(in case that unit 1(and 2) in “System Version”
is 1.500 and higher)
1
Insert the supplied update memory card.
2
Turn on the power of the console. The display will indicate
“Welcome to SSFDC program update,” and the update will
begin automatically.
3
When the update is completed, the system will start up
automatically.
4
Remove the update memory card and keep it in a safe place.
Perform the update - Update B
(in case that unit 1(and 2) in “System Version”
is under 1.500)
1
Insert the supplied update memory card.
2
Hold down [PROJECT] and [F5], and turn on the power of the
console.
Take the procedure of
Update B if the current
“System Version” is under
1.500.
When the console has
already newest system
program, the system does
not begin update.
Never turn off the power or
remove the memory card
while the update is taking
place. Doing so will
damage the internal system
program, making it
impossible to start up
correctly.
Take the procedure of
Update A if the current
“System Version” is 1.500
and higher.