Roland VE-7000, Owner'S Manual

Page: 12 / 34

12
Before you begin
3
Release the buttons when “
∗∗∗∗
” is indicated in the display.
4
Turn off the power of the VM system when “VM-7000
updated. Reboot Please” is indicated in the display.
5
Remove the update memory card and keep it in a safe place.
Check the version
1
Take the procedure specified in “Check the version”(p. 10) in
order to check the current version.
2
The current version will be displayed. Verify that “System
Version” is 1.520 and higher and unit1 (and 2) in “System
Version” is 1.500 and higher.
3
When you press any button on the panel, the previous display
will reappear.
Restore your data
1
Insert the memory card (2--16 MB) that you used to save your
data.
2
Press [PROJECT].
3
Choose “SELECT.”
4
Use the V1 knob (SELECT NUMBER) to select the project that
you stored.
5
Press [SELECT].
6
Press [F5 (OK)]. The project will be loaded.
Never turn off the power or
remove the memory card
while the update is taking
place. Doing so will
damage the internal system
program, making it
impossible to start up
correctly.