Roland V-Drums TDW-20, Owner'S Manual

Page: 26 / 100

26
New Functions
After pressing the [INST], the [F4 (INT<>EXP)] allows you to choose
from the TD-20’s internal sounds or those on the TDW-20
expansion board.
The prefix “EXP” is attached to TDW-20’s Inst Group name.
To restore an instrument to a non v-edited state press [SHIFT] and
[F4] while in the INST EDIT screen. This was previously referred to as
“default” in the original TD-20 version.
* Not all sounds have full V-Edit parameters.
For the KICK
• Snare Buzz: The dynamic response of this function
is improved.
• Mic Position: New positions allow even more realistic
microphone placement.
• Mic Size: Improvement in sub-low frequency
attack for the KICK.
• Kit Resonance: Accurately reproduces the whole kit
resonating when the kick is played.
Drum Instruments Parameters [INST]
Instrument Selection About V-EDIT Parameters
TDW-20_e.book 26 ページ ２００８年７月１７日 木曜日 午前１１時３５分