Roland V-Drums TDW-20, Owner'S Manual

Page: 10 / 100

10
Installing the TDW-20 in the TD-20
Installation Procedure
1. Check the package contents to be sure you have the expansion
board, screwdriver (for removing the cover on the back of the
TD-20), locking key (for securing the expansion board into
place) and CompactFlash card. Please leave the expansion
board in its package until it is time to install it.
2. Back up your data (carefully read p. 12).
3. Install the TDW-20 expansion board (p. 13).
4. Update the TD-20 (p. 15).
Enclosed CompactFlash Card
• Do NOT use with a computer BEFORE executing the update
process.
Back up Your Original TD-20 Data!
• Save your current data to your CompactFlash card before you
install the TDW-20.
When executing an update, all data and settings in the TD-20
are lost. That’s why it is important to back up your data and
settings on a ConpactFlash card before updating. If you are
using the CompactFlash card included with your TDW-20,
insert the card ONLY AFTER turning the power on. Otherwise
the “updater” on the card will automatically open.
IMPORTANT! Please Read before Beginning the Installation Process
TDW-20_e.book 10 ページ ２００８年７月１７日 木曜日 午前１１時３５分