Roland V-Drums TDW-20, Owner'S Manual

Page: 12 / 100

12
If you are using the CompactFlash card included with your
TDW-20, insert the card ONLY AFTER turning the power on.
Otherwise the “updater” on the card will automatically open.
1. Insert a CompactFlash card into the TD-20’s front
panel memory card slot.
* Carefully insert the CompactFlash card all the way in—until
it is firmly in place.
2. Press [CARD].
The [CARD] and CompactFlash indicators light up. The “CARD
MENU” screen appears.
* If you insert a card that has never been used with the TD-20,
the screen will indicate “Unformatted!” Press [CARD] and [F4
(FORMAT)] to format.
3. Then press [F1 (SAVE)].
4. In the “CARD SAVE” screen, use [+/-] or [VALUE] to
select the backup destination for the data you are
saving.
5. Press [F5 (SAVE)].
If you want to rename the backup, press [F4 (NAME)].
6. The confirmation screen appears, press [F5
(EXECUTE)] to save the data.
If you decide not to proceed with the backup, press [F1
(CANCEL)].
7. Press [F5 (EXECUTE)] to save the data.
If You Have BULK DUMP Data Stored on Your
Computer
If you have individual kit data or your entire kit’s data stored on a
computer, in order for it to be compatible with the expanded
version, you must load it into the TD-20, and save the data to a
CompactFlash card BEFORE updating with the TDW-20.
IMPORTANT! Backing Up Your Data
TDW-20_e.book 12 ページ ２００８年７月１７日 木曜日 午前１１時３５分