Roland V-Drums TD-8 Owner'S Manual Download Page 135

Page: 135 / 224

135

Chapter 7 Making Global Settings for the TD-8

Chapter 7

Adjusting the Contrast of the
Display

The display contrast is strongly influenced by the location of
the TD-8 and the lighting of the room it’s in. Adjust this
parameter when needed.

fig.08-020 (LCD CONTRAST)

Press [SETUP], then [F3 (

MENU)].

[SETUP] lights, and a pop-up menu appears.

Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [

] or [

] to move the cursor to

“UTIL.”

Press [F3] to confirm your choice.

Press [F1 (LCD)].

The “LCD CONTRAST” screen appears.

Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.

The higher the value selected, the darker the screen
becomes.

LCD CONTRAST: 1–16

You can also adjust it by holding down [KIT] and
rotating the VALUE dial.

Tuning the TD-8
(MASTER TUNING)

This tunes Parts 1–4 as a whole.

Tuning of the drum kit part and percussion part instruments
is not affected by this setting.

The reference pitch is 440.0 Hz.

fig.08-019

Press [SETUP], then [F3 (

MENU)].

[SETUP] lights, and a pop-up menu appears.

Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [

] or [

] to move the cursor to

“UTIL.”

Press [F3] to confirm your choice.

Press [F2 (TUNE)].

The “MASTER TUNE” screen appears.

Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.

MASTER TUNE: 415.3–466.2 (Hz) (0.1 Hz steps)

Summary of Contents for V-Drums TD-8

































































































































































































































Search results

Summary of Contents for V-Drums TD-8

Reviews:

Related manuals for V-Drums TD-8

Brands by name

Popular brands

Roland V-Drums TD-8, Owner'S Manual

Search results

Summary of Contents for V-Drums TD-8

Reviews:

Related manuals for V-Drums TD-8

Brands by name

Popular brands