manualshive.com logo in svg

Roland V-40HD, Owner'S Manual, Page: 6 / 60

Share
Download
Roland V-40HD Owner'S Manual Download Page 6

6

 IMPORTANT  NOTES

About Intellectual Property Rights

Roland

• 

Roland is either registered trademark or trademark of Roland Corporation in the United States and/or other countries.

Others

• 

All product names mentioned in this document are trademarks or registered trademarks of their respective owners.

C-01-1

• 

It is forbidden by law to make an audio recording, video recording, copy or revision of a third party’s copyrighted work (musical work, video work, 
broadcast, live performance, or other work), whether in whole or in part, and distribute, sell, lease, perform, or broadcast it without the permission of the 
copyright owner.

C-01-2

• 

Do not use this product for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to 
any infringements of third-party copyrights arising through your use of this product.

C-02

• 

This product can be used to record or duplicate audio or visual material without being limited by certain technological copy-protection measures. This is 
due to the fact that this product is intended to be used for the purpose of producing original music or video material, and is therefore designed so that 
material that does not infringe copyrights belonging to others (for example, your own original works) can be recorded or duplicated freely.

MMP

• 

MMP (Moore Microprocessor Portfolio) refers to a patent portfolio concerned with microprocessor architecture, which was developed by Technology 
Properties Limited (TPL). Roland has licensed this technology from the TPL Group.

Summary of Contents for V-40HD





























































Reviews:

No comments