manualshive.com logo in svg

Roland V-40HD, Owner'S Manual, Page: 47 / 60

Share
Download
Roland V-40HD Owner'S Manual Download Page 47

47

Menu Operations and Menu List

*  You can adjust the values of below items only while you are selecting RGB/Component as the source.

Sampling

Use the following items to make settings related to sampling.

Auto Sampling

Execute

Press [ENTER] to execute the auto sampling.

Position H

-1920 – [0] - +1920

This sets the horizontal position.

Position V

-1200 – [0] - +1200

This sets the vertical position.

Frequency

-128 – [0] - +127

This sets the frequency.

Phase

-128 – [0] - +127

This sets the phase.

Detailed setup for Background

Color Setting

Use the following items to make settings related to background color.

Red

-64 - [0] +63

This adjusts the red level.

Green

-64 - [0] +63

This adjusts the green level.

Blue

-64 - [0] +63

This adjusts the blue level.

Output menu

Output 1/2 Format

HDMI/RGB Component 

480i4:3/576i4:3, 480i16:9/576i16:9, 
480p4:3/576p4:3, 480p16:9/576p16:9, 720P, 
1080i, [1080P], VGA, SVGA, XGA, WXGA, FWXGA, 
SXGA, SXGA+, UXGA, WUXGA 

This selects the format of OUTPUT 1/2 (HDMI and RGB/Component).

Composite 

[480i4:3/576i4:3], 480i16:9/576i16:9 

This selects the Composite output format.

PVW Out Format

1080p

This displays the PVW OUT format (fixed).

Output 1 

Press [ENTER] to go to detailed setup of Output 1.

Output 2 

Press [ENTER] to go to detailed setup of Output 2.

Composite 

Press [ENTER] to go to detailed setup of Composite.

PVW Output 

Press [ENTER] to go to detailed setup of PVW Out.

Detailed setup for Output 1/2

Color Space 

RGB(0-255), RGB(16-
235), YCC(422), 
YCC(444) 

This selects the color space. When selecting [Auto], the color space is automatically selected depending 
on the output format. For details of the values, see [Color Space] in the Input menu (p. 46)
*  When 480i or 576i is selected as the output format, you cannot select the RGB values.

Bus Assign

[PGM], PST, DSK Source This selects the bus for output.

DVI-D/HDMI Signal

DVI-D, [HDMI]

This selects the output mode of the HDMI connectors.

Tearing Filter

[OFF], ON

This turns on/off the tearing filter. The output delays for 1 frame when this is tuned on.

Scaling

Zoom 

50% - [100%] - 200% 

This sets the zoom ratio.

Type 

[Full], Letterbox, Crop, 
Dot by Dot, Manual 

This selects the cropping format. For details of the values, see [Type] of 
[Scaling] in the Input menu (p. 46)

Size H 

-1920 - [0] - +1920 

This sets the horizontal size.

Size V 

-1200 - [0] - +1200 

This sets the vertical size.

Position H 

-176 - [0] - +223 

This sets the horizontal position.

Position V 

-1200 - [0] - +1200 

This sets the vertical position.

Color Correction

Brightness 

-64 - [0] - +63 

This adjusts the brightness.

Contrast 

-64 - [0] - +63 

This adjusts the contrast.

Saturation 

-64 - [0] - +63 

This adjusts the saturation.

Red 

-64 - [0] - +63 

This adjusts the red level.

Green 

-64 - [0] - +63 

This adjusts the green level.

Blue 

-64 - [0] - +63 

This adjusts the blue level.

Summary of Contents for V-40HD





























































Reviews:

No comments