manualshive.com logo in svg

Roland V-40HD, Owner'S Manual, Page: 28 / 60

Share
Download
Roland V-40HD Owner'S Manual Download Page 28

28

Using this unit makes it possible to create video transitions that occur at extremely high speeds. Depending on physical condition, viewing such 
video might cause headache or discomfort. Never use this unit to create or present such video that might be distressful to health. Roland assumes 
no responsibility in the event of any distress experienced by you or other viewers.

Checking the Currently Selected Channels

Before you carry out a transition, check which channels are currently selected. Immediately after turning the V-40HD on, MEMORY 
1-1 (No. 1 in bank 1) is selected. The channels in the panel state saved at 1-1 are selected.

*  For information on saving data to MEMORY buttons, refer to “Saving/Recalling Settings” (p. 40).

In the [INPUT] mode of the preview monitor, a red border is displayed around the video currently being output, and a green border 
is displayed around the video on standby.
At the [A-BUS/PGM] input selectors, the button for the channel currently being output lights up red. At [B-BUS/PST], the button for 
the channel currently on standby lights up green.

fig.current-selection.eps

Presented by

CH.1 HDMI

CH.2 HDMI

CH.3 HDMI

CH.4 HDMI

Red

Green

Red

Green

Switching Video in the PGM/PST Mode

The default operation mode of the V-40HD is the PGM/PST mode. You can also select the A/B mode (p. 31).

Switching the Video Using Buttons

Use the [AUTO] button to switch the video. The effect selected using the [WIPE PATTERN] buttons is applied for the time set using 
the [TRANSITION] dial.

1.  Move the video fader all the way.

Move the video fader all the way toward either the front or the back.

fig.fader-max.eps

or

Basic Operations

Summary of Contents for V-40HD





























































Reviews:

No comments