35
Compositing the Video
4. Adjust the size and position.
At the SCALING section, press the [CONTROL] button to make the [PinP] indicator light up. Use the [POSITION] joystick and the
[SIZE] dial to adjust the display position and size of the inset screen.
fig.adjust-size-position.eps
5. Output the composited results.
Pressing the [AUTO] button outputs the results of compositing. At this stage, the color of the pressed PinP selector button turns to red.
* Press the [AUTO] button again to make the logo/text disappear.
fig.press-AUTO.eps
You can also make the inset screen appear or disappear by moving the video fader.
When you carry out PinP composition, the current output channel becomes the background when one the PinP selector button is pressed. Select a
channel for the inset screen on the opponent bus and operate the video fader or [AUTO] button to make the inset screen appear/disappear.
Compositing Using DSK
You can perform video transitions or picture-in-picture composition at upstream, then composite logos and text on the results at
downstream. This feature makes it possible to switch the video or perform picture-in-picture while keeping logos/text displayed.
fig.DSK-image.eps
Mix / Picture in Picture
DSK
Presented by
Presented by
By default, the video on channel 4 is displayed in the foreground of DSK compositing. If you are using the unit with the default
setting, input the logos and text to channel 4. To change the setting, refer to “Menu Operations and Menu List” (p. 45). Also, the
extraction color for DSK compositing is set to black by default. You can use the menus to change this as well.
Use the button and the dial in the DSK Section to perform DSK compositing.
1. Select the background channel.
Select a channel for background using buttons on [A-BUS/PGM] input selectors.