manualshive.com logo in svg

Roland V-40HD, Owner'S Manual, Page: 48 / 60

Share
Download
Roland V-40HD Owner'S Manual Download Page 48

48

Menu Operations and Menu List

Detailed setup for Composite

Scaling

Zoom 

50% - [100%] 

This sets the zoom ratio.

Type 

[Full], Letterbox, Crop, Dot by Dot, Manual 

This selects the cropping format. For details of the values, 
see [Type] of [Scaling] in the Input menu (p. 46)

Size H 

-1000 - [0] - +1920 

This sets the horizontal size.

Size V 

-540 - [0] - +1200 

This sets the vertical size.

Position H 

-800 - [0] - +800 

This sets the horizontal position.

Position V 

-400 - [0] - +400 

This sets the vertical position.

Color Correction

Brightness 

-64 - [0] - +63 

This adjusts the brightness.

Contrast 

-64 - [0] - +63 

This adjusts the contrast.

Saturation 

-64 - [0] - +63 

This adjusts the saturation.

Red 

-64 - [0] - +63 

This adjusts the red level.

Green 

-64 - [0] - +63 

This adjusts the green level.

Blue 

-64 - [0] - +63 

This adjusts the blue level.

Detailed setup for PVW Out

DVI-D/HDMI Signal DVI-D, [HDMI]

This selects the output mode of the PVW OUT.

Transition menu

Time 

0.0s - [1.0s] - 10.0s, 0s0f - 10s0f, 0f - 300f 

This sets the transition time based on the units selected.

Unit 

[Seconds], S Frames, Frames 

This selects the unit for transition time.

Wipe Pattern 

1, 2, MIX, CUT 

This selects the wipe pattern from wipe pattern memory 1 
or 2 and MIX (cross-fade) or CUT.

Detailed setup for Wipe Pattern 1/2

Pattern 

Horizontal, Vertical, Horizontal Open, Vertical Open, Upper Left, 
Upper Right, Lower Left, Lower Right, Box 

This selects the type of wipe pattern.

Direction 

[Normal], Reverse, N/R  

This selects the wipe direction. Selecting [N/R] switches 
the wipe direction (normal <> reverse) reciprocally.

PinP menu

Status 

[OFF], PVW, PGM 

Selects the output status of PinP compositing from among the following: 
OFF : No display.
PVW : Displayed at preview output.
PGM : Displayed at final output.

Detailed setup for Position 1 - 4

Make settings related to the PinP [1] - [4] buttons.

Size 

10% - [30%] - +100% 

This sets the size of the inset screen.

Position H 

-100% - +100% 

This sets the horizontal position of the inset screen.

Position V 

-100% - +100% 

This sets the vertical position of the inset screen.

Cropping Type 

[Original], 4:3, 5:4, 16:9, Manual 

This selects the image ratio when cropping the inset 
screen.

When Manual is selected for Cropping Type, you can make the following settings:

Manual Cropping H  -2000 - [0] - +2000 

This sets the horizontal cropping width.

Manual Cropping V  -2000 - [0] - +2000 

This sets the vertical cropping width.

View 

These specify zoom in/out amount and position of the image displayed in the inset screen.

Size 

[100%] - 1000% 

This sets the amount of zoom in or out.

Position H 

-1920 - [0] - +1920 

This sets the horizontal display position.

Position V 

-1200 - [0] - +1200 

This sets the vertical display position.

Summary of Contents for V-40HD





























































Reviews:

No comments