Basic Printing Method
2
Basic
Operation
36
E
Lower the loading lever (front).
The media is held in place.
F
Line up the edges of the media with the centers of the holes of the media clamps (left
and right).
When you are performing cutting only, do not use the media clamps.
"
P. 59, "Important Note on Cutting"
G
Close the front cover.
If the [PRESS ENTER KEY TO CONTINUE] message appears on the screen, press [ENTER].
When the front cover is closed, the print-head carriage moves and detects the width of media. This
operation is called initialization. When initialization ends, [SETUP] on the operation panel lights, and
the printable width is displayed on the screen. This completes the setup of the media.
Important: Remove roll media when not in use.
Do not leave roll media loaded on the machine for a long period of time. Be sure to remove and store the
media when not in use. Leaving the roll media loaded on the machine for a long period of time will cause the
media to sag, which may deteriorate the printing quality and may also lead to motor errors.
