Advanced Settings for Printing and Cutting with Crop Marks
4
Advanced
Functions
149
F
Check the test pattern (C&C1).
Check whether the printing position and the cutting position are aligned.
Cutting position
Printing position
Printing position and cutting
position are misaligned.
Printing position and cutting
position are aligned.
If the printing position and the cutting position are aligned, no corrections are necessary.
If the printing position and the cutting position are not aligned, proceed to the next procedure.
3.
Set the correction values.
A
Press [ ] twice to display the screen shown below.
CROP-CUT ADJ.
TEST PRINT 2
B
Press [ENTER].
The test pattern (C&C2) is printed and cut.
C
Press [ ] to display the screen shown below.
CROP-CUT ADJ.
SETTING
D
Check the correction values from the test pattern (C&C2) condition.
The point where the cutting line intersects the correction-value scale is the correction value. Check
the scan direction (the direction of print head movement) and the feed direction (the media feed
direction).
Cutting line
In this case, the correction
value is "-0.3."
Cutting line
Correction-value scale
Feed direction
Scan direction
E
Press [ ].
