Roland Sign Maker CAMM-1 PNC-1050, User Manual

Page: 38 / 42

36
Appendix B Specification of PNC-1050
The specification of hardware
Interface specification
[Parallel]
Standard In Compliance with the specification of Centronics
Input Signal STROBE ( 1BIT ), DATA (8BITS )
Output Signal BUSY ( 1BIT ), ACK ( 1BIT )
I/O Signal Level TTL level
Transmission Method
Asynchronous
[Serial]
Standard RS-232 Specifications
Transmission Method
Asynchronous, duplex data transmission
Transmission Speed 150, 300, 600, 1200, 2400, 4800, 9600
Parity Check Odd, Even, None
Data Bits 7 bits 8 bits
Stop Bits 1 bit or 2 bits
×
×
PNC-1050
Mechanism Sprocket feed with cutting device
Maximum Cutting Ares
335 mm 24998 mm
13-3/16" 984-1/8"
Max. Cutting speed 200 mm (7-7/8") / sec
Max. tool force 200 g
Number of tool up/down 11 per sec.
Mechanical resolution 0.003125 mm / step (micro step controlled)
Software resolution 0.025 mm / step
Interface
Paralell ( in compliance with the specification of Centronics ) ,
Serial ( RS-232C specification )
Buffer size 2 K byte
Instruction system CAMM-GL III (mode1, mode2)
Key , , , , ENTER, MENU
Switch, etc. POWER, Pen force knob
Display Liquid crystal display (20 characters x 2 lines)
Power consumption 0.5 A / 117 V, 0.3 A / 220-230 V, 0.3 A / 240 V
Accoustic noise level
Cutting mode: under 60 dB(A) Stanby mode: under 50
dB(A) ( according to ISO 7779 )
External dimensions 585 ( W ) x 207 ( D ) x 391 ( H ) mm
23-1/16" ( W ) x 8-3/16" ( D ) x 15-7/16" ( H )
Weight 15.5kg ( 34.2 lb. )
Operating temperature 5 — 40°C
Operating humidity 35% — 80% (non-condensing )