27
Offset value setting
Set the appropriate offset value for the sheet being used. For details, see the description of the
cutting test on page 14.
Smoothing ON/OFF
The smoothing function is switched [ON] when the PNC-1050 is shipped from the factory. This
enables arcs and other curves to be cut smoothly, without jaggedness.
Since it is ordinarily set to ON, curved lines, such as arcs, will be cut flawlessly. How-
ever, when cutting out small-sized characters or intricate designs, some of the corners
may turn out rounded. If this should occur, you should set Smoothing to OFF, and try
making the cutout again.
Page feed setting
Selecting [PAGE] with the
and
keys and pressing the
ENTER
key causes the portion of the
sheet that has already been cut to move toward the front of the unit, and the screen for (13)-2 is
displayed. This screen allows the origin point after movement to be set. When [UNSET] is
selected, the PNC-1050 sets the origin point automatically. To manually set the origin point, use
the
and
keys to move the tool carriage to the position where the origin point is to be set.
Then use the
and
keys to select [SET,] and press the
ENTER
key.
Confirming current cutting
This confirms how cutting was carried out, with the sheet remaining loaded and in place. When
[VIEW] is selected, the cut portion of the sheet is moved toward the front of the unit.
To confirm cutting that is currently in progress, you must first pause the cutting. To do this, press
the
ENTER
key while cutting is in progress. The following message appears on the display, and
cutting is paused. Press the
MENU
key once to display the screen for (13). After using the method
just described to confirm cutting, press the
MENU
key again to return to the screen above. Then
select [CONT] to continue cutting.
PAUSE ON
CONT STOP
Checking the origin
This confirms the origin point currently in effect. Selecting [ORIGIN] and pressing the
ENTER
key
moves the tool carriage to the origin point that is currently set.
(11)
(12)
(13) - PAGE
(13) - VIEW
(13) - ORIGIN
Summary of Contents for Sign Maker CAMM-1 PNC-1050
Page 1: ...ROLAND DG CORPORATION Model PNC 1050 User s Manual SIGN MAKER...
Page 41: ...39...
Page 42: ...F2082693BE V3 1...
