Roland SF-200, Setup Manual

Page: 44 / 50

2.
Set the subnet mask.
A
Press [ ].
The screen shown below appears.
NETWORK
SUBNET MASK
B
Press [ ] twice to display the screen shown below.
SUBNET MASK
000.000.000.000
C
Press [ ] or [ ] to select the address number.
D
Press [ ].
E
Repeat steps
C
and
D
to set the subnet mask (255.255.255.0).
Note: For the subnet mask, make the setting the same value as the one used by the computer. Here,
"255.255.255.000" is entered by way of example.
SUBNET MASK
255.255.255.000
F
When you have finished making the setting, press [ENTER].
G
Press [ ].
The screen shown below appears again.
NETWORK
SUBNET MASK
If you connect the computer and the machine on a one-to-one basis, this completes the settings to
make on the printer. Proceed to P. 43 "Step 3: Make the Port Settings for the Software RIP".
If you need to set the gateway address, proceed to the following procedure, P. 43 "3. Set the gateway
address.".
Connecting to the Computer
42
2.Installation