D
Select [Internet Protocol Version 4 (TCP/IPv4)], and then click [Properties].
MEMO
If the [Internet Protocol] check box is clear, select it.
E
Select [Use the following IP address].
F
Enter the information as shown below, then click [OK].
Item
Address to enter
IP address
192.168.0.XXX
Subnet mask
255.255.255.0
Here, "XXX" can be any number from 001 to 254. However, be sure to specify a number that is different
from the numbers used for other computers and devices. Here, as an example, enter "192.168.0.101"
for the IP address and "255.255.255.0" for the subnet mask.
G
Click [Close] in [Ethernet Properties], and then click [Close] in [Ethernet Status].
Connecting to the Computer
40
2.Installation
Summary of Contents for SF-200
Page 46: ...Connecting to the Computer 44 2 Installation ...
Page 50: ...48 ...