Roland SF-200 Setup Manual Download | Manualshive

Page: 20 / 50

background image

18

1.Introduction

Machine Highlights

Features of This Machine

This machine is provided with the following features.

• Capable of printing even on thick materials

This machine is a printer that can print on a variety of materials from thin paper to thick materials. You can use
this printer to print high-quality images on various types of materials.

• Head gap sensor

This sensor detects the height of the object to be printed on placed on the table. Then the table's height is
adjusted according to the height of the media so that high-quality images can be printed safely.

•

Location specification using an LED pointer

Using an LED pointer, you can easily and accurately specify the print-start location and the printing area. You
can also verify the printing area before you carry out printing, which can help prevent failures when
performing actual printing (preview feature).

About the User's Manuals for This Machine

The following documentation is included with the machine.

Paper Manuals

• Setup Guide

This manual contains details on how to install the machine and how to configure its initial settings.

• Regular Maintenance Guide

This manual contains details on the machine's daily maintenance as well as on the maintenance that must be
performed periodically.

Electronic-format Manual

• User's Manual

This manual contains details such as how to use and maintain the machine as well as an FAQ (a set of
frequently asked questions).

You can view and download the electronic-format manual from the following URL or QR code.

https://downloadcenter.rolanddg.com/SF-200

* You can also view and download the paper manuals.

* You can also view this website from a smartphone.

«
...
18
19
20
21
22
...
»

Summary of Contents for SF-200



















































Reviews:

No comments

Related manuals for SF-200

Brand: iSys Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands