Roland SF-200 Setup Manual Download Page 22 | Manualshive

Page: 22 / 50

background image

Deciding On an Installation Environment

Deciding On an Installation Site

Install the machine in a quiet, stable location offering good operating conditions. An unsuitable location can cause
accidents, fire, faulty operation, or breakdown.

WARNING

Install the machine in a location that is level, stable, and able to bear the weight

of the machine.

The total weight of the machine may reach 118 kg (260.1 lb.) or more. Installation in
an unsuitable location may cause a major accident, including tip over, fall, or collapse.

CAUTION

Unloading and emplacement are operations that must be performed by four

persons or more.

Tasks that require undue effort when performed by a small number of persons may

result in physical injury. Also, if dropped, such items may cause injury.

WARNING

Never install this machine outside or in any location where exposure to water or

high humidity may occur.

Current leakage may cause electrical shock or fire.

WARNING

Never install the machine close to any flammable object or in a gas-filled location.

Combustion or explosion could occur.

WARNING

Position so that the power plug is within immediate reach at all times.

This is to enable quick disconnection of the power plug in the event of an
emergency. Install the machine next to an electrical outlet. Also, provide enough
empty space to allow immediate access to the electrical outlet.

CAUTION

Ensure adequate ventilation for the work area.

Failing to perform ventilation may result in a health hazard or danger of
combustion due to ink fumes.

Unsuitable installation sites

•   Locations subject to large fluctuations in temperature or humidity
•   Locations subject to shaking or vibration
•   Locations where the floor is tilted, not level, or unstable
•   Dusty locations
•   Locations exposed to direct sunlight
•   Locations near air-conditioning or heating equipment
•   Locations exposed to water or moving air
•   Locations exposed to considerable electrical or magnetic noise or other forms of electromagnetic energy

Point

When you install the machine, check that all four rubber feet of the machine contact the ground.
If any of the rubber feet do not contact the ground, you can adjust their height by rotating them.

20

2.Installation

«
...
20
21
22
23
24
...
»

Summary of Contents for SF-200



















































Reviews:

No comments

Related manuals for SF-200

Brand: Summa Pages: 89

imagePROGRAF TX-4100

Brand: Canon Pages: 1068

Designjet 510 series

Brand: HP Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands