Roland RD-700NX Page 84 Owner'S Manual Download

Page: 84 / 106

Detailed Settings for Each Function

Restoring the Settings to the Factory

Condition

The settings stored in the RD-700NX can be returned to their factory

settings.

NOTE

•

Executing “Factory Reset All” results in deletion of the Live Sets (p.

44). If you want to keep the recorded content, save the Live Set file to

your USB memory (p. 77).

•

When making USB connections, be absolutely sure to disconnect

the USB cable before starting.

Press the [MENU] button, getting the indicator to light .

The Menu screen appears.

Press the Cursor [

] [

] buttons to select “8 .Utility,” and

press the [ENTER] button to display the Edit screen .

Press the Cursor [

] [

] buttons to select “3 . Factory Reset

Current” or “4 . Factory Reset All .”

Parameter

Description

Factory Reset Current

The currently selected Live Set returned to their

factory settings.

Factory Reset All

The settings stored in the RD-700NX can be

returned to their factory settings.

NOTE

While the Factory Reset is in progress, no sounds are produced

even when the keys are pressed. In addition, Rhythms being played

are also stopped.

Factory Reset Current

Press the [ENTER] button .

A screen like the one shown below appears.

NOTE

If you’ve selected One Touch, the settings of the ONE TOUCH PIANO

buttons and the ONE TOUCH E. PIANO buttons will be reset.

Press the [ENTER] button .

The confirmation message appears.

To cancel the Factory Reset, press the [EXIT/SHIFT] button.

Press the [ENTER] button once again to start the Factory

Reset operation .

NOTE

Never turn off the power during Factory Reset (while “Executing...

Don’t Power Off” appears in the display).

After the Factory Reset operation is finished, the Utility screen returns
to the display.

Factory Reset All

Press the [ENTER] button .

A screen like the one shown below appears.

Press the [ENTER] button .

The confirmation message appears.

To cancel the Factory Reset, press the [EXIT/SHIFT] button.

Press the [ENTER] button once again to start the Factory

Reset operation .

NOTE

Never turn off the power during Factory Reset (while “Executing...

Don’t Power Off” appears in the display).

Switch off the power, then turn it back on again .

Summary of Contents for RD-700NX











































































































Search results

Summary of Contents for RD-700NX

Reviews:

Related manuals for RD-700NX

Brands by name

Popular brands

Roland RD-700NX, Owner'S Manual

Search results

Summary of Contents for RD-700NX

Reviews:

Related manuals for RD-700NX

Brands by name

Popular brands