Roland RD-700NX, Owner'S Manual

Page: 67 / 106

68
Detailed Settings for Each Function
Parameter Value
Function/Parameter Setting
Changed
FC1
FC2
145:
Live Set UP
Switches the Live Sets in
ascending order.
146:
Live Set DOWN
Switches the Live Sets in
descending order.
Retaining the Current Tone Even When Tones
are Switched (Tone Remain)
This setting specifies whether the currently heard sound will continue
(ON) or not (OFF) when another tone is selected.
Parameter Value
Tone Remain OFF, ON
NOTE
• Effects settings change as soon as you switch to a new Tone,
without being influenced by the Tone Remain setting. Because of
this, certain effects settings can cause notes that were until then
sounding to no longer be heard, even though Tone Remain has
been set to ON.
•
Even if Tone Remain is set to ON, the sound of the current tone is
not carried over when changing from a Virtual Tone wheel tone to a
non-Virtual Tone wheel tone.
Preventing the [S1] [S2] buttons from Being
Switched (S1/S2 Mode)
The settings of the [S1] [S2] buttons can be stored for each Live Set (p.
44).
This setting determines whether or not the settings of the [S1] [S2]
buttons are switched to the values stored in the Live Set you are
switching to.
Parameter Value Description
S1/S2 Mode
Live Set
The settings of the [S1] [S2]
buttons change when Live Sets
are switched.
SYSTEM
The settings of the [S1] [S2]
buttons do not change when
Live Sets are switched.
Assigning the [S1] [S2] buttons When S1/S2 Mode is Set to
“SYSTEM”
When this is set to SYSTEM, “S1/S2 Setting” appears in the lower right
of the screen. Pressing the [TONE EDIT] (S1/S2 Setting) button at this
point calls up the screen for the function assigned to the [S1] [S2]
buttons.
Parameter Value
Function/Parameter Setting
Changed
S1/S2
00: OFF No control
01:
1OCT
Playing a key will also sound
an additional note one octave
higher.
02:
COUPLE -1OCT
Playing a key will also sound an
additional note one octave lower.
03:
2OCT
Playing a key will also sound
an additional note two octave
higher.
04:
COUPLE -2OCT
Playing a key will also sound an
additional note two octave lower.
05:
5TH
Playing a key will also sound
an additional note a fifth (7
semitones) higher.
06:
COUPLE -4TH
Playing a key will also sound
an additional note a fourth (5
semitones) lower.
07:
OCTAVE UP
Each time you press the button,
the keyboard range will rise by
an octave (maximum 4 octaves).
08:
OCTAVE DOWN
Each time you press the button,
the keyboard range will lower by
an octave (maximum 4 octaves).
09:
START/STOP
The external sequencer will start/
stop.
10:
TAP TEMPO
The tempo will be modified to
the interval at which you press
the button.
11:
SONG PLY/STP
Starts and stops the song (p. 38).
12:
SONG RESET
Returns you to the beginning of
the song.
13:
SONG BWD
Rewinds the song.
14:
SONG FWD
Fast-forwards the song.
15:
MFX1 SW
Turns on/off multi-effect 1 (p. 41)
for the layer specified by MFX
Control Destination.
16:
MFX2 SW
Turns on/off multi-effect 2 (p. 41)
for the layer specified by MFX
Control Destination.
17:
ROTARY SPEED
When using the rotary
effect, switches the rotary effect
between slow and fast.
18:
Live Set UP
Switches the Live Sets in
ascending order.
19:
Live Set DOWN
Switches the Live Sets in
descending order.
20:
PANEL LOCK
Switches the Panel Lock (p. 36) on
and off.