manualshive.com logo in svg

Roland RD-700NX, Owner'S Manual

Share
Download
Roland RD-700NX Owner'S Manual Download Page 77

78

Detailed Settings for Each Function

Calling Up Live Set Files (LIVE SET Load)

Here’s how to load a previously saved Live Set file.

NOTE

The current settings are erased when a Live Set file is called up. Be 

sure to save you would like to keep first before calling up (p. 77).

1. 

Press the [MENU] button, getting the indicator to light .

The Menu screen appears.

2. 

Press the Cursor [

] [

] buttons to select “5 .File,” then 

press the [ENTER] button .

The Edit screen appears.

3. 

Press the Cursor [

] [

] buttons to select “1 . Live Set Load” 

then press the [ENTER] button .

The following screen appears.

4. 

Press the [LAYER EDIT] (MEDIA) button to select the memory 

into which you want to load the data .

5. 

When loading System parameter settings, press the [TONE 

EDIT] (System) button to check in the check box .

MEMO

System Parameter is following settings.

• 

Edit “1. System” settings (p. 66)

• 

Edit “7. V-LINK” settings (p. 83)

• 

Favorite Live Set settings (p. 44)

• 

One-Touch Piano, One-Touch E. Piano settings (p. 46, p. 50)

• 

Pedal assignment for when Pedal Mode is set to SYSTEM (p. 67)

• 

Compressor settings (p. 76)

The system parameter is memorized by only the Live Set file saved 

after pressing the [LAYER EDIT] (WRITE) button to memorize a Live Set 

to RD-700NX.

6. 

Use the Cursor [

] [

] buttons or the VALUE dial to select 

the file you want to call up, then press the [ENTER] button .

The confirmation message appears.

If you do not want to load the Live Set file, press the [EXIT/SHIFT] 

button.

7. 

Press the [ENTER] button once again to load the Live Set file .

The Live Set file is loaded into the RD-700NX.

NOTE

Be sure never to turn off the power while the load is in progress.

MEMO

If you load a file with a name that contains characters that cannot 

be displayed by the RD-700NX, the file name is displayed as “?.”

8. 

Press the [MENU] button, extinguishing its indicator .

You’ll be returned to the Live Set screen or the One Touch screen.

Deleting a Live Set File (LIVE SET Delete)

Here’s how to delete a previously saved Live Set file.

1. 

Press the [MENU] button, getting the indicator to light .

The Menu screen appears.

2. 

Press the Cursor [

] [

] buttons to select “5 .File,” then 

press the [ENTER] button .

The Edit screen appears.

3. 

Press the Cursor [

] [

] buttons to select “2 . Live Set 

Delete,” then press the [ENTER] button .

The following screen appears.

Summary of Contents for RD-700NX











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands