Roland RD-700NX Page 18 Owner'S Manual Download

Page: 18 / 106

Getting Ready

Connecting the CD Drive

If you’re using a stand (KS-G8), you can use the screw holes on the bottom of the RD-700NX to attach a CD drive (sold separately).

MEMO

For information on turning on/off your CD drive and how to insert or remove a CD, refer to the owner’s manual that came with your CD drive.

Connect the USB cable included with the CD drive to the RD-700NX’s USB MEMORY connector .

Rear Panel

NOTE

When connecting the USB cable, make sure that it is oriented correctly, and push it fi rmly all the way into the connector. Do not use excessive force.

Switch on power to the connected CD drive .

Switch on the RD-700NX’s power .

NOTE

•

Use a CD drive sold by Roland. We cannot guarantee operation if any other CD drive is used.

•

CDs that contain both music tracks and data will not play correctly.

•

The RD-700NX is capable of playing back only commercial CDs that conform the offi cial standards-those that carry the “COMPACT disc DIGITAL

AUDIO” logo.

•

The usability and sound quality of audio discs that incorporate copyright protection technology and other nonstandard CDs cannot be guaranteed.

•

For details on music discs that incorporate copyright protection technology, please contact the disc manufacturer.

•

You cannot save songs to CDs, and you cannot delete songs recorded to CDs. Furthermore, you cannot format CDs.

Summary of Contents for RD-700NX











































































































Search results

Summary of Contents for RD-700NX

Reviews:

Related manuals for RD-700NX

Brands by name

Popular brands

Roland RD-700NX, Owner'S Manual

Search results

Summary of Contents for RD-700NX

Reviews:

Related manuals for RD-700NX

Brands by name

Popular brands