Roland PNC-1600, User Manual

Page: 16 / 47

14
LL UR
X: 0 Y: 0
4. Hold down the [ ENTER ] key and press [ F1 ] key. The message " Set UR Completed " is displayed,
and the setting for LL is made.
5. Next set UR. Use the [ ], [ ], [ ], [ ], and [ FAST ] keys to move the tool carriage to the upper-
right of the sheet.
1. After loading a sheet in place, turn on the power.
2. Press the [ F1 ] key to display the sheet size setting screen.
3. Use the [ ], [ ], [ ], [ ], and [ FAST ] keys to move the tool carriage to the lower-left of the
sheet. The coordinate value ( X, Y ) will change to reflect movement of the tool carriage.
Making the Settings
Figure 2-13
6. Hold down the [ ENTER ] key and press [ F2 ] key . The message "Set UR Completed " is displayed, and
the setting for UR is made.
7. The setting for cutting area has now been made. No cutting will be performed outside the area defined
by the values of LL and UR.
To continue using a cutting area of the same orientation and size, set only LL. The position of UR will
automatically be moved correspondingly and set.
At this time, the orientation values are written to memory and the coordinate values for LL and UR will not
change unless newly set. If the [ F1 ] key or [ F2 ] key is pressed within the Sheet Size Menu, the tool carriage
will move in response to the LL and UR entered at that time.
Figure 2-14