Roland PNC-1600, User Manual

Page: 14 / 47

12
3
Figure 2-10
Depending on the thickness of the material to be
cut, use the spacers included with the PNC-
1900/1600 to adjust the height of the cutter tip
so that it is about 2 mm from the sheet.
4
Figure 2-11
Once the proper height has been established using
spacers, firmly tighten down the tool mounting
screw so that the blade holder does not move.
Spacer
Approx. 2 mm
Sheet
2.4 Installing the Blade
2
Figure 2-8
Figure 2-9
1
Loosen the tool setscrew on the tool carriage and
insert the blade holder.
Mount the blade on the blade holder. Be careful
not to break off the blade when doing this.
Blade
Blade holder
Tool setscrew
Caution
When setting or changing the cutter, handle the cutter carefully to avoid injury.