10
2.3 Loading a Sheet
1
Caution
If the control panel is bumped by the body during operation, unexpected movement of the
rail may result. To avoid danger of hands, clothing, or other objects being caught, take care
to ensure that the keys on the control panel are not accidentally pressed.
When loading a roll sheet, do not use a roll weighing 10 kg ( 22 lb. ) or more or having a
diameter of 14 cm ( 5-1/2") or more. Failure to do so will result in improper cutting.
It is recommended that installation of the sheet hanger be carried out by at least two persons
working together.
The PNC-1900/1600 can cut either cut sheets or roll sheets. Cut sheets and roll sheets are loading on the
PNC-1900/1600 in different ways, each of which is described below. Be sure to use the appropriate method
for the type of sheet you are using.
Roll Sheets
Roll sheets of the following sizes can be loading on the PNC-1900/1600.
• PNC-1900
:
Roll sheets up to 940 mm ( 37" ) in width
• PNC-1600 :
Roll sheets up to 640 mm ( 25-3/16" ) in width
Roll sheets of any size up to the widths described above can be cut.
Pass the shaft through the roll sheet and fit into the sheet holder bracket as in the figure.
Figure 2-4
3
Fit the side pieces for the sheet hanger into the
places where the feet were mounted. Align the
tab shown by the arrow with the small hole on the
sheet hanger side piece, and then reattach the feet
removed in step 1.
2
To install the sheet hanger included with the
PNC-1900/1600, first remove the two feet on the
bottom right of the machine by turning them
counterclockwise.
Figure 2-3
Figure 2-2
Bottom of the
PNC-1900/1600
Summary of Contents for PNC-1600
