Roland LEF-300 Master Manual Download Page 95

Page: 95 / 100

Main Specifications

Chapter 3 Appendix

Specification Table

LEF-300

Printing technology

Piezoelectric inkjet

Acceptable
media

Width

Max. 800 mm (31.5 in.)

Length

Max. 360 mm (14.2 in.)

Thickness

Max. 100 mm (3.94 in.)

Weight

Max. 8 kg (18 lb.)

Maximum printing width/printing
length

Max. 770 (width) × 330 (L) mm (30.3 × 13 in.)

Ink cartridges

Type

ECO-UV (EUV and EUV4) 220 cc cartridge
ECO-UV (EUV and EUV4) 500 cc cartridge (White ink and primer are not available in
500 cc cartridges.)

Colors

Six colors (cyan, magenta, yellow, black, white, and gloss × 2)
Six colors (cyan, magenta, yellow, black, white, and gloss) and primer

Ink-curing unit

Built-in UV-LED lamp

Print resolution (dpi)

Max. 1,440 dpi

Distance accuracy (*1)

±0.3 mm (±11.8 mil) or ±0.3% of the specified distance, whichever is greater (*1)

Position reproducibility (*2)

±0.2 mm (±7.9 mil) or ±0.1% of the specified distance, whichever is greater (*2)

Connectivity

Ethernet (10BASE-T/100BASE-TX, automatic switching)

Power-saving function

Automatic sleep feature

Power requirements

AC 100 to 240 V ± 10%, 2.1 A, 50/60 Hz

Power
consumption

During operation

Approx. 178 W

Sleep mode

Approx. 18 W

Acoustic
noise level

During operation

60 dB (A) or less

During standby

49 dB (A) or less

Outer dimensions

1,560 (width) × 955 (depth) × 576 (height) mm (61.4 × 37.6 × 22.7 in.)

Outer dimensions
(when the ink-cartridge tray is attached)

1,866 (width) × 955 (depth) × 576 (height) mm (73.5

× 37.6 × 22.7 in.)

Weight

144 kg (317.5 lb.)

Environment

During operation (*3)

Temperature: 20 to 32°C (68 to 90°F) (22°C [72°F] or higher recommended),
humidity: 35 to 80%RH (no condensation)

Not operating

Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no condensation)

Included items

Power cord, RIP & PRINT MANAGEMENT SOFTWARE, user documentation, pad trays,
etc.

*1 ,*2

•

Media type: Media specified by Roland DG Corp.

•

Temperature: 23°C (73°F), humidity: 50%

•

Media must be loaded correctly.

•

Excluding expansion/contraction of the media

•

Assumes all correction and adjustment functions of the machine have been used properly.

Summary of Contents for LEF-300





































































































Search results

Summary of Contents for LEF-300

Reviews:

Related manuals for LEF-300

Brands by name

Popular brands

Roland LEF-300, Master Manual

Search results

Summary of Contents for LEF-300

Reviews:

Related manuals for LEF-300

Brands by name

Popular brands