EXR-46 OR
39
The EXR-46 OR’s Function mode contains more advanced settings you may not need every day. They allow you to fine-tune your instrument’s response. It would therefore be a good idea to familiarize yourself
with these parameters. Most settings (“*”) can be written to a User Program (see p. 45). Other parameters (“°”) are saved to the Flash memory when you leave the Function mode.
Editing parameters (general
procedure)
You can edit the EXR-46 OR’s Function parameters via the dis-
play. Here is a general outline of the procedure for all parame-
ters discussed below:
(1) Press
[FUNCTION]
.
(2) Use FAMILY
[√][®]
to select the Function group that con-
tains the desired parameter:
■
KB SET:
KbdTouch, MsterTune, USRTrnsp, GLB Trnsp,
TransMod, PB Range, KeySplit, SpltHold, SpltInt, FSW, Port
Main, Port Dual, Mode Main, Mode Dual
■
DRUM PAD:
DK1/DrumPad1~DK8/DrumPad8
■
METRONOM:
Mtro TS, MetroVol, Count-In
■
OCTAVE:
MAIN Oct, DUAL Oct, SPLT Oct
■
VOLUME:
Main Vol, Dual Vol, SplitVol, Auto Bass,
AccDrums, AccBass, Accomp1~Accomp6, Song1~Song16
■
ARR SET:
ArrChord, Arr Hold, EP Chord, Bass Inv, MI (Mel-
ody Intelligence), InEnCHRD, Sync Stop
■
EFFECTS:
REV (Reverb), CHR (Chorus), MFX, Tone MFX, Rev
MAIN, Chr MAIN, Pan MAIN, Rev DUAL, Chr DUAL, Pan DUAL,
RevSPLIT, ChrSPLIT, PanSPLIT
■
KB SCALE:
Scale C/C
#
/D/E
b
/E/F/F
#
/G/A
b
/A/B
b
/B, Scale
Mode
■
MIDI:
Local, MidiTxRx, Sync Rx, Style PC, LyricsTx,
NTARx14, PitchBnd, Modulatn, ProgChng, Velo Rx, Clock Tx,
StartStp, SongPosP
■
UTILITY:
LockInit, InitFLASH, Resume
■
WriteSNG (see p. 49)
■
WriteSTL (see p. 50)
■
RemoveSNG (see p. 50)
■
Remove STL (see p. 51)
■
WriteUPG (see p. 50)
■
ReadUPG (see p. 50)
■
RemovUPG (see p. 51)
(3) Use SELECT
[√][®]
to select the parameter you wish to edit
(see below).
Note:
In FUNCTION mode, SELECT
[√][®]
do not allow you to
jump from one family to the next.
The “VALUE” message and a setting appear to signal that you
can change (“edit”) the selected parameter.
(4) Use the DATA ENTRY
[–][+]
or numeric buttons (only for
values) to modify the setting of the selected parameter.
Note:
See also page 20.
Note:
To return to the default value of the currently selected
parameter, press
[+]
and
[–]
simultaneously.
(5) Use FAMILY
[√][®]
to select another Function parameter.
(6) Continue with step (3).
(7) Press another “big” button in the DATA ENTRY section to
leave this function.
KB SET parameters
■
Kbd Touch*
(1~127, Default setting: 110) Use this parameter to set the
EXR-46 OR’s fixed velocity value that will be used when the
icon is not displayed. See p. 34.
Note:
This parameter can also be selected by pressing and holding
[KEYBOARD¥TOUCH]
.
■
MstrTune° (Master Tune)
(427.4~452.6, Default setting: 440.0) This parameter allows you
to change the EXR-46 OR’s overall tuning, which may be nec-
essary when you accompany a singer, an acoustic instrument,
or when you play to a recording on CD or cassette.
■
USRTrnsp*
(–12~12, Default setting: 0) Use this parameter to transpose
the EXR-46 OR in semitones. If you’re not sure what transposi-
tion is, see p. 32. This parameter can also be selected by press-
ing the
[TRANSPOSE]
button.
■
GLBTrnsp
(–6~5, Default setting: 0) Use this parameter to temporarily
transpose the EXR-46 OR in semitones. If you’re not sure what
transposition is, see (see p. 33). This parameter can also be
selected by pressing the
[TRANSPOSE]
button and pressing
SELECT
[®]
once.
12. Function menu
FUNCTION
FAMILY
SELECT
KEY TOUCH
Summary of Contents for Interactive Arranger EXR-46 OR
Page 60: ...r EXR 46 OR 60...
