ROTATE
Menu Description
ROTATE
Stored in Memory
Yes
Factory Default
0deg
Selection Choices
0deg or 90deg
Description
Sets the direction of the coordinate axis for cutting.
When set to
0deg
(default value), the origin is set at the lower left of the material.
When set to
90deg
, the origin is set at the lower right of the material, and the data is rotated counterclockwise by
90 degrees.
Note that
when
90deg
is selected, the coordinate axis changes.
The arrows in the figure indicate the positive directions of X and Y axes.
When set to
0deg
When set to
90deg
If you are using crop marks, be sure to select 0deg.
