FlexiEngrave Configuration for
ADA/Braille Signage.
Click on the options tab and double click the 0.060in. Braille tool.
Set the XY Velocity to 100mm/sec., Z Velocity to 2mm/sec. And
Spindle RPM to 14000RPM and click Apply.
Configure the engraver and the Raster
TM
Braille drill tool and select
Send to output the Raster
TM
Braille to the engraver.
Once Braille drill has been engraved, lower the Raster
TM
Pen
attachment for inserting the Raster
TM
beads.
Summary of Contents for EGX-400
