NOTES:
Setting and using the Raster
TM
Pen Attachment
To use the Raster
TM
Pen attachment, tighten the Z
Axis screw.
Press the MENU key multiple times until the I/O,
OTHERS, TEACHING, SELF menu is displayed.
Select the OTHER menu and press the ENTER key.
Press the MENU key multiple times until the AUTO
Z Control Menu is displayed and press the ENTER
key.
Select AUTO Z CONTROL OFF and press the
ENTER key.
Press the MENU key multiple times to get back to
the default screen.
Press the Z- key to lower the Raster
TM
Pen to the
surface of the material so the spring compresses
slightly and set this as the Z0 Origin.
Resend Braille job with proper offset to insert the
Raster
TM
beads in place.
Summary of Contents for EGX-400
