Chapter 2 Installation and Setup
39
Chapter 2 Installation and Setup
2-3 Cable Connections
Connecting the Handy Panel
CAUTION
Make sure the power to the machine is switched off before attempting to
connect or disconnect the cables.
Connection or disconnection while the power is on may cause the machine
to malfunction.
Connecting the Power Cord
WARNING
Connect to an electrical outlet that complies with this machine's ratings
(for voltage and frequency).
Provide a power supply whose amperage is 2.8 A or higher (for 100 to 120 V)
or 1.2 A or higher (for 220 to 240 V).
WARNING
Handle the power cord, plug, and electrical outlet correctly and with care.
Never use any article that is damaged.
Using a damaged article may result in fire or electrical shock.
WARNING
When using an extension cord or power strip, use one that adequately
satisfies the machine's ratings (for voltage, frequency, and current).
Use of multiple electrical loads on a single electrical outlet or of a lengthy
extension cord may cause fire.
WARNING
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the event of
malfunction.
WARNING
Connect to an electrical outlet. Never connect directly to a power distribu-
tion panel or other such fixed wiring equipment.
Doing so increases the hazard of fire or electrical shock.
This machine requires a single-phase commercial power supply.
100 to 120 V: 2.8A or higher
220 to 240 V: 1.2 A or higher
When inserting, orient correctly
and insert fully.
Cable clamp
Left side
Handy panel
Connecting the handy panel
is not required to operate the
machine.
