32
Chapter 2 Installation and Setup
Chapter 2 Installation and Setup
*Note: The cutting machine is shipped from the factory with these parts installed on it.
2-1 Checking the Included Items
The following items are included with the machine. Make sure they are all present and accounted for.
Power cord(1)
Handy panel(1)
Collet
(diameter 3.175 mm)
(1)
Collet
(diameter 4.0mm)(1)
Collet
(diameter 3.0mm) (1)
Hexagonal driver(1)
Spanner (10 mm,
17mm) (one for each) Hexagonal wrench (1)
Detection pin (1)
Attachment for detec-
tion (1)
Cap* (1)
Spacer (1)
Clamp C-1 for block
workpiece (1)
Clamp C-2 for block
workpiece (1)
Clamp D-1 for block
workpiece (1)
Clamp D-2 for block
workpiece (1)
Dust tray (1)
Dust collection hose
A (1)
Dust collection hose
B (1)
Dust collection hose
C (1)
