To Ensure Safe Use
10
WARNING
Connect to an electrical outlet that complies
with this machine’s ratings (for voltage and
frequency).
Provide a power supply whose amperage
is 2.8 A or higher (for 100 to 120 V) or 1.2 A
or higher (for 220 to 240 V).
Never use out of doors or in any loca-
tion where exposure to water or high
humidity may occur. Never touch with
wet hands.
Doing so may result in fire or electrical
shock.
Never allow any foreign object to get
inside. Never expose to liquid spills.
Inserting objects such as coins or matches
or allowing beverages to be spilled into the
ventilation ports may result in fire or electri
-
cal shock. If anything gets inside, immedi-
ately disconnect the power cord and contact
your authorized Roland DG Corp. dealer.
Danger of electrical short, shock, electrocution, or fire
WARNING
Never place any flammable object nearby.
Never use a combustible aerosol spray
nearby. Never use in any location where
gases can accumulate.
Combustion or explosion may be a dan-
ger.
Handle the power cord, plug, and electri-
cal outlet correctly and with care. Never
use any article that is damaged.
Using a damaged article may result in fire
or electrical shock.
When using an extension cord or power
strip, use one that adequately satisfies
the machine’s ratings (for voltage, fre-
quency, and current).
Use of multiple electrical loads on a single
electrical outlet or of a lengthy extension
cord may cause fire.
When the machine will be out of use
for a prolonged period, disconnect the
power cord.
This can prevent accidents in the event of
current leakage or unintended startup.
Connect to ground.
This can prevent fire or electrical shock due
to current leakage in the event of malfunc-
tion.
Position so that the power plug is within
immediate reach at all times.
This is to enable quick disconnection of the
power plug in the event of an emergency. In-
stall the machine next to an electrical outlet.
Also, provide enough empty space to allow
immediate access to the electrical outlet.
Never use cutting oil.
This machine is not designed for the flow of
cutting oil. Oil may get inside the machine
and cause fire or electrical shock.
Ratings
