5-1 Maintenance
Chapter 5 Appendix
Chapter 5 Appendix
Chapter 5 Appendix
Maintenance of the Spindle Unit
The spindle unit and the belt are parts that wear out. The replacement cycle varies according to usage condi-
tions, but as a general guide, you should replace them after every 2,000 hours of use. You can use VPanel to
view the total working time of the spindle. Refer to this to determine when replacement is needed.
For information on how to replace the spindle unit, refer to the documentation included with the ZS-30
replacement spindle unit.
Checking the total working time of the spindle using VPanel
The total working time
of the spindle is reset.
Click "Setup".
Total working time
of the spindle
86
