Roland Cakewalk A-500S Owner'S Manual Download

Page: 28 / 80

Use MIDI Functionality

What is UTILITY mode?

This is the mode in which you assign the control messages you want to use, and make settings for the A-500S itself.

In UTILITY mode, you use the keyboard to choose the function you want to set. In UTILITY mode, playing the
keyboard will not transmit notes.

To switch the A-500S to UTILITY mode...

fig.utl

To switch the A-500S to UTILITY mode from PLAY mode, simultaneously hold the

[MIDI CH]

button and

[PGM CHANGE]

button down.

The display will indicate “UTL,” and the A-500S enters UTILITY mode.

Functions in UTILITY mode

UTILITY mode

Transmit a bank select LSB
message

This switches the bank.
Transmit bank select LSB (CC#32) message.

p. 34

Transmit a bank select MSB
message

This switches the bank.
Transmit bank select MSB (CC#00) message.

p. 35

Continue playback from the
current location

This transmits a continue message (FBh); playback that had been
paused will continue from the current location.

p. 39

Transmit a poly mode on
message

Sets the voice mode to poly mode.

p. 40

Transmit a mono mode on
message

Sets the voice mode to mono mode.

p. 41

Transmit a portamento on
message

Turns on the portamento function that creates a smooth pitch change
from one note to the next (Portamento On).

p. 42

Transmit a portamento off
message

Turns the portamento function off.

p. 43

Transmit a GM2 system on
message

Transmit a GM2 system on message.

p. 44

Transmit a reset message

Stop “stuck” notes or other problems with the sound on a connected
MIDI sound module.

p. 45

Make system settings

You can make system settings for the A-500S itself.

p. 47

A-500S_e.book 28 ページ２０１０年２月１９日　金曜日　午後８時３分

Summary of Contents for Cakewalk A-500S

















































































Search results

Summary of Contents for Cakewalk A-500S

Reviews:

Related manuals for Cakewalk A-500S

Brands by name

Popular brands

Roland Cakewalk A-500S, Owner'S Manual

Search results

Summary of Contents for Cakewalk A-500S

Reviews:

Related manuals for Cakewalk A-500S

Brands by name

Popular brands